Vacuum Tray Dryer

Vacuum Tray dryer is the most commonly used batch dryer. They are box-shaped and loaded and unloaded via a door (two doors on the larger models). Inside are several heating plates mounted one above the other on which the product is placed in trays. The bottoms of both heating plates and trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To void retrograde condensation the cabinet walls are indirectly preheated by the heating plates. Next, the product is introduced and heated at atmospheric pressure. Only after all individual product trays reach the same temperature the cabinet is evacuated and drying can start. The preheating phase is very important in order that the drying curve and the foaming of the product is identical throughout the cabinet. During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuums of only few mbar abs are reached. Heating temperatures are normally in the range between 800C and 1100C. Depending on product and surface load, drying takes from a few hours to 1 to 2 days. For some products the vacuum and temperature profiles are automatically controlled in order to prevent a pass over of the critical product temperature.


  • All contact parts are made out of SS304 / SS316 / SS316L quality material in GMP models and mild steel externals with stainless steel internals in standard model.
  • Hollow pad type heating shelves which are easily removable for maintenance.
  • Condenser and condensate receiver fixed on the dryer body or stand alone for remote installation.
  • Full welded skirt on vacuum dryer body for flush mounting through the wall.
  • External fluid heating of dryer with protective panels in stainless steel or mild steel powder coated.
  • Dedicated fluid heating and circulating systems. These can be steam or electrically heated. Fluid heating systems are available for water as well as thermic fluid (for temperature requirements above 95 oC).
  • Validation ports and nitrogen purge nozzles.
  • Can be designed to customers specification requirements.
  • Steam sterilisable models available.
  • Double door loading available for large models.
  • Halar lined internals for corrosive applications.

@ 2017 Jog Pharma Machinery. All Rights Reserved.

Designed and Developed by Webtech Media Synergy Pvt Ltd.